Solar Monitoring Apps Explained: What They Show and How to Use Them
Your solar monitoring app is the cheapest way to catch problems early. Learn what it tracks, what costs money and which alerts deserve a call.
A solar monitoring app shows how much electricity your panels are making, often hour by hour, and in many setups how much your home is using. It is usually free from your inverter maker, and checking it for a minute each week is the easiest way to spot a failed part before it costs you months of lost production.
Below we explain where the data comes from, what the main screens mean, which patterns are warning signs and when monitoring itself can cost money.
Key takeaways
- The app usually comes from your inverter brand, such as Enphase or SolarEdge, and both list their homeowner apps as free.
- Panel-level data is only available with microinverters or optimizers; string systems show whole-system totals.
- A sudden drop to zero, one panel lagging the rest, or months below last year are the signs worth acting on.
- Communication parts often carry a shorter warranty than the inverter itself, commonly five years per EnergySage's 2024 comparison.
- SunStrong Management, which runs the mySunPower app for former SunPower systems, added paid premium features starting April 15, 2025.
How a solar monitoring app gets its data
The app is the last link in a short chain:
- The inverter, microinverters or optimizers measure power from the panels.
- A gateway or the inverter itself sends readings over Wi-Fi, an Ethernet cable or a cellular modem.
- The manufacturer's cloud stores the data.
- Your phone app reads it from that cloud.
If any link breaks, the app goes blank even when the panels are working fine. That is why "no data" is not the same as "no power." NREL's 2018 O&M best-practices guide notes that network-connected inverters also let service technicians run remote tests, change settings and reset equipment, which can save a truck roll.
Data can lag. Some systems upload every few minutes, others less often, and a short gap after a storm or internet blip usually fills in on its own once the connection returns. A gap that lasts days is the one to chase.
Production data is standard. Home consumption data needs extra meters, often clamp-on sensors installed in your electrical panel. Not every system has them, so ask your installer what was set up.
Common solar monitoring apps by brand
Your app depends on your equipment, not on your installer. Here are the main ones homeowners see, based on each publisher's app store listing or support pages checked in November 2026.
| App | Publisher | Equipment | Cost to homeowner | Notable features |
|---|---|---|---|---|
| Enphase Enlighten | Enphase Energy | Enphase microinverters and gateways | Free per app listing | Hourly, daily and monthly production; performance vs. historical weather; reports |
| mySolarEdge | SolarEdge Technologies | SolarEdge inverters and optimizers | Free per app listing | Real-time production and use; inverter status on SetApp models; EV charger control |
| mySunPower / SunStrong Connect | SunStrong Management | Former SunPower systems | Basic free; premium $9.99/month or $99.99/year (lease customers included) | Health alerts and live data free; history, panel-level data and reports in premium |
Tesla, SMA and other brands have their own apps. Third-party apps also exist, but they still depend on your equipment's data feed.
Reading the main screens
Production (kWh)
This is energy produced over a period. Daily totals swing with weather, so compare weeks or months, not single days. Enphase's Enlighten app, for example, lets you compare performance against historical weather, which helps separate a cloudy month from a hardware problem.
Power (kW)
This is the rate of output right now. On a clear day it should form a smooth hill from morning to evening. Sharp notches at the same time each day often mean shade from a tree, chimney or neighbor's building.
Consumption and net
If consumption meters are installed, you can see whether you are exporting to the grid or importing. This helps you shift big loads, like laundry or EV charging, into sunny hours. If your utility uses time-of-use pricing, our guide to time-of-use rates explains why timing matters.
Panel-level view
With microinverters or optimizers, you see a grid of panels. A healthy array shows similar colors or numbers across panels with the same orientation. One panel that stays far below its neighbors on sunny days needs a closer look.
Warning signs your solar monitoring app can catch
- Flat zero on a sunny day. Could be a tripped breaker, an inverter fault or a grid outage. See our inverter troubleshooting guide.
- "Not reporting" messages. Usually a lost internet connection. Enphase's support topics suggest checking whether your Wi-Fi password or internet provider has changed.
- One panel or microinverter at zero. Often a single failed device, which would be invisible on your bill.
- A slow slide below last year. NREL's 2024 study of U.S. commercial and utility-scale systems found a median performance loss of 0.75% per year, so small declines are expected. Bigger drops point to shading, soiling or failing parts.
- Error or alert codes. Save screenshots with the date. They help with warranty claims.
NREL's 2018 guide also lists inverter failure as one of the most frequent causes of performance loss, which is exactly what monitoring catches fastest.
What monitoring costs and how warranties treat it
For most owners the app is free. Costs show up in three places:
- Communication hardware. EnergySage's September 2024 warranty comparison lists communications warranties of five years for Enphase, SolarEdge, Tigo, SMA and others, and three years for some brands. That is shorter than the inverter coverage, so a failed gateway may be on you.
- Service visits. EnergySage's August 2025 repair guide says to expect around a couple of hundred dollars for a visit if warranty does not cover labor.
- Subscriptions. SunStrong Management's FAQ (updated June 3, 2025) says premium features for mySunPower cost $9.99 a month or $99.99 a year starting April 15, 2025, with lease customers included at no cost. It also said cellular connections would stop being supported from that date, so owners needed to move to Wi-Fi or another connection.
Some warranty terms also matter. Inverter and panel warranties often need proof of when a problem started. Monitoring history gives you that record. Qcells' 2025 module warranty, for example, excludes defects not reported within 30 days of discovery, so acting on alerts quickly protects your claim.
Keeping your solar monitoring app working after an installer closes
Monitoring accounts are often set up by the installer. If that company shuts down, your system keeps producing, but you may lose access or alerts. Steps that help:
- Write down your inverter brand, model and serial number from the label.
- Contact the manufacturer's US homeowner support to get the account moved into your name.
- Ask a new installer to be added as the service partner on the account.
- Reconnect the gateway to your current Wi-Fi network.
Our solar orphans hub covers these steps in detail, and our page on the SunPower monitoring app after the bankruptcy covers that specific case. If you need a new service company, the solar company directory can help you research local options.
Habits that keep monitoring useful
An app only helps if someone looks at it. A few low-effort habits go a long way:
- Turn on email or push notifications for system alerts.
- Save a screenshot of each month's total so you have your own record if an account is lost.
- Write down your installer's estimated annual production from your contract and compare it each year.
- After storms, hail or nearby construction, check the panel-level view for any changes.
When to call a pro
Call your installer or a certified technician when an alert does not clear after a router restart, when a panel or microinverter stays at zero, or when production stays clearly below the same month last year. EnergySage advises contacting a professional certified by your equipment maker, since tampering with equipment yourself can be dangerous and may void the warranty. Leased systems are usually monitored by the leasing company, so call them first.
Next steps
Open your app, set up email or push alerts if they are not already on, and note your production for this month last year. If your app has stopped updating, follow our step-by-step guide to fixing monitoring that stopped working.
Frequently asked questions
Do I have to pay for a solar monitoring app?
Most inverter makers, including Enphase and SolarEdge, list their homeowner apps as free. Some services charge for extra features, such as SunStrong's premium tier for former SunPower systems.
Why does my solar app show zero when the sun is out?
Either the system has stopped producing or the app has lost its data connection. Check your utility meter or inverter lights to tell which one it is.
Can a monitoring app show my home's electricity use?
Only if consumption meters were installed with your system. Without them, the app shows production only.
Can I see each panel in my solar app?
Panel-level data is available with microinverters or power optimizers. Systems with a single string inverter usually show only whole-system totals.
How often should I check my solar monitoring app?
A quick weekly look plus turning on automatic alerts is enough for most homes. Compare monthly totals with the same month last year to spot slow declines.
Sources
- Apple App Store: Enphase Enlighten (Enphase Energy, Inc.)
- Apple App Store: mySolarEdge (SolarEdge Technologies)
- SunStrong Management: SunStrong Connect FAQ (updated June 3, 2025)
- EnergySage: Solar inverter warranties compared (updated Sept. 2024)
- EnergySage: When solar panel repair is needed (updated Aug. 2025)
- NREL: Best Practices for Operation and Maintenance of PV and Energy Storage Systems, 3rd Edition (Dec. 2018)
- NREL: How extreme weather and system aging affect the U.S. photovoltaic fleet (2024, updated 2025)
- Enphase: System owner troubleshooting topics
- Qcells: Limited Warranty for Crystalline PV Modules, Americas (Rev04, Oct. 2025)
Questions and comments
Be the first to ask a question or share your experience.