Solar Ownership

Microinverter Failure: What to Do When One Panel Stops Producing

Microinverter Failure: What to Do When One Panel Stops Producing

When one panel drops to zero, a failed microinverter is a common cause. Here is how to confirm it, use the warranty, and get it replaced even without your installer.

If you suspect a microinverter failure, first confirm it in your monitoring app: one panel showing zero or no data while its neighbors produce normally is the classic sign. Then contact your installer or the microinverter maker with your system details, because most microinverters carry long manufacturer warranties, though removing and replacing a unit on the roof usually means a labor charge.

The good news is that one failed microinverter affects only its own panel, so the rest of your system keeps working while you sort it out. Here is how to handle it step by step.

Key takeaways

  • A single panel at zero in a panel-level app, with others normal, usually points to that panel's microinverter, its connection or the panel itself.
  • Enphase's US/Canada warranty covers most IQ8 and IQ7 microinverters for 25 years from activation, but it does not cover labor to remove or reinstall them.
  • Enphase starts claims through its Return Merchandise Authorization (RMA) process, and an installer authorized by the owner can handle the replacement.
  • SolarReviews' 2026 guide says microinverters typically cost about $150 to $250 per panel (checked November 2026).
  • Do not climb on the roof or unplug anything. Enphase's manual lists a strict order of steps for disconnecting a microinverter safely.

Signs of microinverter failure

Because each microinverter serves one panel, a failure looks different from a string inverter failure, which usually takes down the whole system. Common signs:

  • One panel at zero in the panel view of your app while the rest show normal output.
  • One panel showing no data or a gray, "not reporting" status for days.
  • System production a few percent lower than the same sunny period last year, with no weather explanation.
  • An error notice from the monitoring platform naming a specific device.

Enphase's IQ8 manual (January 2024) describes the microinverter's own status light: flashing green is normal; flashing orange means the grid is normal but there is no communication with the IQ Gateway; flashing red means the grid is missing or out of specification; and solid red means a "DC Resistance Low, Power Off" condition. You usually cannot see these lights from the ground, which is why the app matters.

Keep the gateway online

Monitoring is how most owners spot a failed microinverter, and it also matters for the warranty. Enphase's US/Canada warranty says its products should be continuously connected to the internet during the warranty period, so the company can diagnose problems remotely and push firmware updates. The same document excludes failures that could have been avoided by using the latest firmware. If your IQ Gateway has been offline for months, reconnecting it is a cheap first step, and it may reveal whether more than one unit is having trouble.

Is it really a microinverter failure? Rule out the easy causes

Before you file a claim, rule out problems that look similar.

What you seePossible causeWhat you can check
Every panel at zeroTripped solar breaker, grid outage, or a gateway or combiner issueSolar breaker in your main panel; whether the grid is up
Every panel "not reporting," but meter export is climbingMonitoring or Wi-Fi problem, not productionGateway internet connection
One panel low but not zeroShade, dirt, debris or a damaged panelLook from the ground for shade, leaves or cracks
One panel at zero for days in good sunFailed microinverter, loose connector or failed panelReport it; a technician must test on the roof
Several panels in one area at zeroBranch circuit or cabling issueReport it; do not touch wiring

If the whole app is dark, see what to do when solar monitoring stops working before assuming hardware failed.

What to do about a microinverter failure, step by step

  1. Document it. Screenshot the panel view showing the affected unit, the date it stopped, and its serial number if the app shows it. Note the weather.
  2. Find your paperwork. Locate your installation date, installer name, contract and any workmanship warranty.
  3. Contact your installer first. Many installers handle the warranty claim and the roof work, and their workmanship warranty may cover labor.
  4. If the installer is gone, contact the manufacturer. Enphase's warranty lists US and Canada customer support at (877) 797-4743 and directs claims through its RMA procedure.
  5. Hire a qualified technician for the swap. Replacement means roof work and electrical disconnection.
  6. Confirm the fix. After replacement, check the app on a sunny day to see the panel reporting normally.

Leave the hands-on work to professionals. Enphase's manual tells technicians to de-energize the AC branch circuit first, use a tool to release the AC connector, cover the panel with an opaque cover, and confirm with a clamp-on meter that no DC current is flowing before unplugging the panel. Those steps exist because panel wiring carries power whenever light hits it.

What the microinverter warranty covers

Using Enphase as the most common example, its US/Canada IQ8 limited warranty (2023 version) says:

  • Length: most IQ8 microinverters, and IQ7 units, are covered for 25 years from the Activation Date. Gateways and communication devices are generally covered for 5 years.
  • Remedy: Enphase will repair or replace a defective product at no charge, or refund the purchase price less depreciation if replacement is not practical. Replacement units are covered for the rest of the original period or 90 days, whichever is later.
  • Labor: not covered. That includes uninstalling the product, reinstalling a replacement and troubleshooting your electrical system.
  • Exclusions: misuse, tampering, improper installation, acts of nature, service performed by anyone who is not an Enphase representative, and failures that the latest firmware could have prevented, among others.
  • Shipping: For valid claims, Enphase pays to ship the repaired or replacement unit to you or to the installer you authorize.
  • New owners: coverage can transfer if the product stays at the same location and the new owner submits a Change of Ownership Form and pays the transfer fee within 30 days of the transfer.

Enphase's warranty page also lists separate labor reimbursement documents for installers, with versions by effective date. Ask your installer or technician whether a labor reimbursement applies to your claim. Older Enphase M-series units have their own warranty documents, so check the one that matches your equipment and activation date. Our inverter warranty comparison covers other brands.

Microinverter replacement cost

If your unit is under warranty, the part should cost nothing, but labor usually does. SolarReviews' 2026 inverter cost guide (checked November 2026) says microinverters typically cost $150 to $250 per panel. It does not give a separate labor price for swapping one unit, and roof access, panel removal and travel all affect the bill, so get a written quote that separates parts and labor.

A few ways to keep costs down:

  • Ask whether your installer's workmanship warranty covers labor. See what a solar workmanship warranty covers.
  • If more than one unit is failing, bundle repairs into one visit.
  • If the system is leased, the leasing company is usually responsible. DOE's Energy Saver says most lease and PPA arrangements require the installer to provide system maintenance.

Should you replace it right away?

One failed microinverter takes one panel offline. On a 20-panel system, that is about 5% of panel capacity, and the loss grows if more units fail. Because the warranty may cover the part and the loss builds over time, it usually makes sense to report it promptly and schedule the fix rather than wait years. If several units fail over time, ask a technician whether there is an underlying cause, such as wiring or water.

Next steps

Gather your screenshots and serial numbers and contact your installer. If your installer has closed, our solar orphans guide explains how to work directly with the manufacturer, and our solar company directory includes equipment makers' details.

Frequently asked questions

How do I know if my microinverter has failed?

The usual sign is one panel showing zero output or no data in your app for several sunny days while the other panels produce normally. A technician confirms it on the roof.

How long do Enphase microinverters last under warranty?

Enphase's US/Canada warranty covers most IQ8 and IQ7 microinverters for 25 years from activation. Gateways and communication devices are generally covered for 5 years.

Does the Enphase warranty pay for labor?

The limited warranty itself excludes labor for removing and reinstalling units. Enphase publishes separate labor reimbursement documents for installers, so ask your installer whether one applies.

Can I replace a microinverter myself?

It is not recommended. Replacement requires roof work and a careful electrical disconnection sequence, and the warranty excludes damage from improper installation.

Does one bad microinverter stop my whole solar system?

No. Each microinverter serves one panel, so the rest of the system keeps producing. You lose that one panel's output until it is fixed.

Sources

Related guides

Questions and comments

Be the first to ask a question or share your experience.

Comments are checked before they appear. No links or advertising. Guidelines.

Calculators for this topic

More solar ownership guides

All solar ownership guides →