Solar

Do Solar Panels Work in Winter? Cold, Snow and Short Days Explained

Do Solar Panels Work in Winter? Cold, Snow and Short Days Explained

Solar panels keep working in winter. Cold actually helps, while short days and heavy snow cover are what cut production.

Yes, solar panels work in winter. The U.S. Department of Energy notes that solar panels produce useful power in all four seasons, and cold temperatures actually help them run more efficiently. What lowers winter output is shorter days, a lower sun and, at times, heavy snow covering the panels.

Key takeaways

  • Cold weather does not stop solar panels. DOE notes that temperatures above 77°F reduce panel voltage, so cool, sunny days are good for production.
  • Winter output is lower mainly because there are fewer daylight hours and the sun sits lower in the sky.
  • Light snow usually blows or slides off. Heavy snow that fully covers panels stops production until it clears.
  • Federal modeling found yearly snow losses near zero in much of the South and up to about 16% in the snowiest parts of the lower 48 states.
  • Judge solar on a full year of production, not on a single winter month.

Do solar panels work in winter? The short science

Solar panels turn light into electricity, not heat. The cells are made of a semiconductor, usually silicon. When light is absorbed, it frees electrons that flow as an electric current. Air temperature is not part of that process, so a cold day with clear skies can be a strong day for your system.

In fact, heat is the bigger enemy. A Department of Energy guide on preparing solar for winter weather says modules perform better in the cold and that output voltage declines once temperatures rise above 77°F. Panel spec sheets show this as a "temperature coefficient." For example, Qcells lists its Q.TRON BLK M-G2+ panels at −0.30% per degree Celsius (per kelvin), and REC lists its Alpha Pure-R panels at −0.24% per degree Celsius. The smaller the number, the less output a panel loses as it heats up.

For a deeper look at that spec, see our guide to the solar panel temperature coefficient.

Why winter solar production is still lower

If cold helps, why do winter bills from solar owners often show less production? A few reasons stack up:

  • Fewer daylight hours. Days are shorter, so panels have less time to work.
  • A lower sun. Sunlight hits at a lower angle and passes through more of the atmosphere. The U.S. Energy Information Administration (EIA) notes that seasonal swings in solar resources get bigger the farther you live from the equator.
  • Clouds and storms. EIA lists clouds, dust and pollution among the things that reduce sunlight reaching the ground.
  • Longer shadows. Trees, chimneys and nearby buildings cast longer shadows when the sun is low. A spot that is sunny in June may be shaded in December.
  • Snow cover. When snow blankets the panels, they produce little or nothing until it melts or slides off.

This is why installers and online tools give production estimates month by month. A healthy system in a northern state can produce far less in December than in June and still meet its yearly estimate.

How snow affects solar panels in winter

A Department of Energy article on solar in winter explains that a light dusting of snow has little effect. Wind often blows it away, and some light can pass through a thin layer to reach the cells. Heavy snow is different: it blocks light and stops production. Once the snow slides off, even partly, the exposed area starts producing again.

Snow has a small upside, too. The same DOE article notes that melting snow can carry dirt away, leaving panels cleaner.

How much production does snow really cost?

The National Renewable Energy Laboratory (now the National Laboratory of the Rockies, or NLR) modeled snow losses for fixed-tilt systems across the country in a 2017 report. The results below show annual energy lost to snow. They are modeled starting points, not predictions for any one year.

LocationLoss at 20° tiltLoss at tilt equal to latitude
International Falls, MN15.9%15.5%
Duluth, MN15.1%13.9%
Caribou, ME14.4%12.2%
Houghton, MI12.6%10.7%
Flagstaff, AZ4.7%3.0%
Cape Hatteras, NC0.1%0.1%
Phoenix, AZ0.0%0.0%

Two patterns stand out. First, even the snowiest spots in the lower 48 lost well under a fifth of their yearly output in this model. Second, steeper panels generally lost less, because snow slides off them more easily.

Should you clear snow off your panels?

Usually, no. DOE's winter guidance says to remove snow only when buildup is heavy enough to risk overloading panels, and to use a broom rather than a shovel. Climbing on an icy roof is dangerous, and metal tools can scratch glass or damage frames. Many owners simply wait for the sun to do the work.

Weight matters more than lost production in very snowy areas. The same DOE guidance warns that the weight of accumulated snow can warp or even break a module, and that ice adds extra load. That is why load ratings on spec sheets matter. For example, Qcells lists a maximum test load (push) of 8,100 Pa for its Q.TRON BLK M-G2+, the figure its data sheet gives for snow load. Your installer should match equipment and racking to local snow loads.

Read more in our guide on whether you should remove snow from solar panels.

How to check your winter solar output step by step

  1. Find your monthly estimate. Look at the month-by-month production table in your installer's proposal, or run your address through PVWatts at pvwatts.nlr.gov.
  2. Compare month to month, not year to year averages. Check December's actual output against December's estimate.
  3. Note snowy and cloudy stretches. A week of snow cover can explain a short month on its own.
  4. Look at the full year. Long summer days usually make up for slow winter months. Net metering or bill credits from summer surplus can help cover winter usage, depending on your utility's rules.
  5. Act on real warning signs. If output stays low on clear, snow-free days, check your monitoring app and inverter for errors and contact your installer.

You can estimate yearly and seasonal output for your home with our solar panel calculator.

Common mistakes with solar panels in winter

  • Panicking over one bad month. A low January is normal in northern states. Judge the system over 12 months.
  • Climbing on the roof to clear snow. It is risky, and damaging equipment yourself may not be covered by warranty. Leave it unless snow load is a real concern, and then call a pro.
  • Using hot water or salt. These are not part of DOE's guidance, which calls only for gently using a broom when snow buildup is heavy. Check your panel maker's care instructions first.
  • Ignoring winter shade. A tree that is fine in summer may shade panels in winter. DOE also reminds homeowners that trees keep growing.
  • Expecting power during an outage. Most grid-tied systems shut off when the grid goes down. You need a battery or other backup setup for that.

Questions to ask installers about winter performance

The Federal Trade Commission suggests getting written bids that state system size, expected output, any production guarantee, and equipment and workmanship warranties. For winter, add these questions:

  • Can you show expected production for each month, including December and January?
  • Did your estimate include snow losses for my area? What percentage did you use?
  • What tilt will the panels have, and how will that affect snow shedding?
  • What snow load are the panels and racking rated for, and does that meet local code?
  • How does the production guarantee handle months with heavy snow?
  • What should I do, and not do, when snow covers the array?

Comparing several written bids side by side is the best way to spot unrealistic promises. Our solar quote checker can help you review a quote's numbers.

Next steps

Solar panels in winter keep producing, and cold weather helps more than it hurts. What matters is your local daylight, snowfall and shade over a full year. Start by running your address through our solar panel calculator, then compare installers on our solar company reviews page before you sign.

Frequently asked questions

Do solar panels work in the cold?

Yes. Solar panels convert light, not heat, into electricity, and they actually lose some efficiency when they get hot. DOE guidance notes temperatures above 77°F cause voltage to decrease.

Do solar panels work when covered in snow?

A light dusting has little effect because some light passes through and wind often clears it. Heavy snow that fully covers the panels stops production until it melts or slides off.

How much less do solar panels produce in winter?

It depends on your location, tilt and shade. Winter output is lower mainly because of shorter days and a lower sun, and the drop is bigger the farther north you live, so check a month-by-month estimate for your address.

Should I remove snow from my solar panels?

Usually not. DOE guidance suggests removing snow only if buildup is heavy enough to overload the panels, and using a broom rather than a shovel. Avoid climbing on icy roofs.

Are solar panels worth it in snowy states?

They can be. In a 2017 NREL model, snow losses in the snowiest parts of the lower 48 were up to about 16% of yearly output. Your electricity rates and utility credit rules usually matter more to payback.

Sources

Related guides

Questions and comments

Be the first to ask a question or share your experience.

Comments are checked before they appear. No links or advertising. Guidelines.

Calculators for this topic

More solar guides

All solar guides →