Solar Shingles vs Solar Panels: Cost, Output and Which Fits Your Roof
Solar shingles blend into the roof but cost more and make less power per square foot. Here is how they compare with standard panels.
In the solar shingles vs panels decision, standard rack-mounted panels win for most homeowners on cost and power: they produce more electricity per square foot and cost less per watt. Solar shingles mainly make sense when you need a new roof anyway and care a lot about appearance or HOA rules; an EnergySage analysis estimated that shingles cost roughly 60% to 190% more than panels for the same output.
Key takeaways
- Panels mount on top of an existing roof; shingles replace part or all of the roofing itself.
- Common panels top 20 watts per square foot; most shingle products fall below 16.
- Fewer companies make and install solar shingles than panels, which can affect repairs and long-term support.
- Both need permits, inspections and utility approval, and neither gets the federal 25D credit if finished after 2025.
How solar shingles differ from solar panels
Standard solar panels are framed glass modules. Installers bolt mounts into the roof framing, attach rails, and clamp the panels a few inches above the existing shingles. The roof underneath stays a normal roof.
Solar shingles, also called solar roof tiles or building-integrated solar, are part of the roof covering. They sit in the same plane as regular roofing, so the roof looks more uniform. Some products cover the whole roof with a mix of active solar tiles and matching non-solar tiles; others blend a section of solar shingles into a conventional asphalt roof.
That difference drives almost everything else: cost, output, who can install them and what happens when one fails.
Solar shingles vs panels: power per square foot
Because shingles are smaller and have more edges and gaps, they make less power from the same area. EnergySage compared several products (article last updated December 2024). The final row uses a current panel spec sheet for reference.
| Product | Type | Rated watts per unit | Watts per square foot |
|---|---|---|---|
| REC Alpha Pure 2 | Panel | 430 W | 20.7 |
| CertainTeed Solstice | Shingle | 70 W | 16.1 |
| LUMA | Shingle | 100 W | 16.2 |
| SunTegra Solar Shingle | Shingle | 114 W | 15.9 |
| Tesla Solar Roof | Tile | 72 W | 15.4 |
| GAF Timberline Solar | Shingle | 45 W | 14.3 |
| Qcells Q.TRON BLK M-G2+ 430 (2025 spec sheet) | Panel | 430 W | About 20.5 |
The Qcells figure is our calculation from the maker's data sheet: the module measures 67.8 by 44.6 inches, or about 21.0 square feet, so 430 watts works out to about 20.5 watts per square foot. By these numbers, the shingles listed make roughly 22% to 31% less power per square foot than the REC panel. If your roof is small or your usage is high, that gap can decide whether you can cover your bill at all.
Cost of solar shingles vs solar panels
Solar shingles cost more per watt. In its comparison, EnergySage said CertainTeed quoted about $4.50 per watt, or $45,000 for a 10 kW system, and that an 11 kW panel system with REC panels came to about $29,500. Those figures were not dated on the page, so treat them as a rough guide rather than today's price.
The fairer comparison is often shingles versus a new roof plus panels. If your roof is near the end of its life, you will pay for roofing either way. EnergySage noted that shingles can come closer to that combined cost, especially for older roofs. If your roof is in good shape, tearing it off to install shingles adds cost you would not otherwise have.
Tax credits do not change the math in 2026. The IRS says the Section 25D residential clean energy credit is not allowed for expenditures made after December 31, 2025, and for solar the expenditure counts as made when installation is completed. Check what is still available locally in our guide to solar incentives still available in 2026.
Roof suitability, direction and shading
Panels fit almost any sound roof: asphalt shingle, metal, tile and flat roofs all have mounting options. Solar shingles are more limited. EnergySage describes them as best suited to new construction or re-roofing and mainly compatible with asphalt-shingle style roofs.
Direction matters for both. Tesla's Solar Roof FAQ says that in the Northern Hemisphere it is typically ideal to have solar tiles on a south-facing roof plane. Panels follow the same logic: in the PVWatts model, a south-facing array north of the equator has an azimuth of 180 degrees.
Shingles also cannot be angled up on a rack. With panels, a flat or low-slope roof can use tilted racking; with shingles you get whatever pitch the roof already has. For a deeper look at roof direction, see our guide to the best roof direction for solar panels.
Permits, inspections and installation timeline
Both options need a building or electrical permit, inspections and utility permission to operate (PTO). Solar shingles usually add roofing work to the job, so ask your building department whether a separate roofing permit is needed.
Tesla gives a useful example of the timeline for an integrated roof:
- Installations take 5 to 15 days on average, depending on the size and complexity of the roof.
- Inspection is usually scheduled one to three weeks after installation, and some jurisdictions also require in-progress inspections.
- Receiving PTO may take one to six weeks depending on location.
- HOA approval is the homeowner's responsibility, and Tesla recommends getting it before scheduling.
A standard panel install on an existing roof is often a shorter on-site job, but permits and utility approval still take time. Our guide on how long solar installation takes walks through each stage.
Warranties, track record and repair risk
Warranty terms vary widely between shingle makers. EnergySage listed, among others:
- CertainTeed: 25-year product warranty and 85% output at year 25.
- Tesla: 25-year product warranty and 85% output at year 25.
- GAF: 25-year product warranty and 84.8% output at year 25.
- LUMA: 5-year product warranty and 80% output at year 25.
- SunTegra: 10-year product warranty.
For comparison, the Qcells Q.TRON data sheet (March 2025) lists a 25-year product warranty and a 25-year linear performance warranty with at least 90.58% of nominal power at year 25.
Track record matters too. In July 2023 the Consumer Product Safety Commission announced a recall of about 2,100 GAF Energy Timberline Solar Energy Shingle systems because electrical components could malfunction and pose a fire hazard; the remedy was a free repair. In December 2025, Electrek reported that GAF Energy closed its San Jose, California hub, laid off 138 workers there and moved production to its Georgetown, Texas factory.
With fewer makers and specialized installers, repairs can be harder to arrange if the original company stops serving your area. Before you sign, ask who will service the roof in year 10 and year 20. Our solar orphans guide explains your options if an installer disappears.
Installation quality checks for either option
- Roof work is dangerous. Leave it to licensed roofing and solar contractors working under permit, and confirm the installer is licensed in your state; Energy Saver recommends asking for proof of licensure and notes NABCEP certification as the industry standard.
- Ask for the panel or shingle model, its spec sheet and both the product and roofing warranties in writing.
- For shingles, ask who warranties the non-solar part of the roof against leaks.
- For panels, ask how roof penetrations are flashed and sealed.
- Compare the production estimate with your own estimate from PVWatts or our calculator.
Next steps
Estimate what a standard panel system would produce on your roof with our solar panel calculator, then compare that with any shingle quote using price per watt. State-by-state production and price data is on our solar panels pages.
Frequently asked questions
Are solar shingles more expensive than solar panels?
Yes, per watt. EnergySage estimated solar shingles cost roughly 60% to 190% more than panels for the same output, though the gap narrows if you need a new roof anyway.
Do solar shingles produce as much power as panels?
No. Most shingle products produce under 16 watts per square foot, while common residential panels exceed 20 watts per square foot.
Can solar shingles be installed on an existing roof?
Usually they are installed by trained contractors as part of a new roof or re-roof, because they replace the roofing material. Panels are the more practical choice if your current roof is in good condition.
Is there a federal tax credit for solar shingles in 2026?
No for new installations. The IRS says the residential clean energy credit is not allowed for expenditures made after December 31, 2025.
How long does a solar shingle installation take?
Tesla says its Solar Roof installations take 5 to 15 days on average, with inspection and utility approval adding several more weeks.
Sources
- Solar shingles: Is the look worth the price? (EnergySage)
- Qcells Q.TRON BLK M-G2+ series data sheet (2025-03 Rev06 NA)
- Solar Roof Frequently Asked Questions (Tesla)
- GAF Energy Recalls Timberline Solar Energy Shingles Due to Fire Hazard (CPSC, 2023)
- GAF Energy closes San Jose solar shingle factory, moves to Texas (Electrek, Dec 2025)
- IRS FAQs on modification of sections 25C, 25D and other energy credits under Public Law 119-21
- PVWatts system design help (National Laboratory of the Rockies SAM documentation)
- Planning a Home Solar Electric System (DOE Energy Saver)
Questions and comments
Be the first to ask a question or share your experience.