Tesla Powerwall 3 vs Franklin aPower: Capacity, Power and Warranty Compared
Powerwall 3 offers 13.5 kWh with a built-in solar inverter; FranklinWH aPower 2 offers 15 kWh with a 15-year warranty. Here is how the specs and terms compare.
In the Powerwall vs Franklin comparison, Tesla Powerwall 3 gives you 13.5 kWh and 11.5 kW of continuous power with a solar inverter built in, while the FranklinWH aPower 2 gives you 15 kWh and 10 kW continuous as an AC-coupled battery with a 15-year warranty. FranklinWH's newer aPower S closes the gap on solar input, accepting up to 20 kW of panels directly, so the real choice often comes down to warranty length, expansion plans and installer support in your area.
Key takeaways
- Powerwall 3: 13.5 kWh, 11.5 kW continuous, 20 kW solar input, 10-year warranty at 70% capacity.
- FranklinWH aPower 2: 15 kWh, up to 10 kW continuous (15 kW peak for 10 seconds), AC-coupled, 15-year warranty or 60 MWh at 70% capacity.
- FranklinWH aPower S: 15 kWh with up to 20 kW of direct solar input, 4 MPPTs and up to 11.5 kW output with PV.
- Both warranties shrink to about four years if the system is not kept online or registered.
- The federal 25D credit does not cover battery expenditures made after December 31, 2025.
How the two systems are built
Tesla Powerwall 3 combines a battery and hybrid solar inverter in one enclosure. Its datasheet lists 6 MPPTs, up to 20 kW of solar input and 97.5% solar-to-home efficiency. That means a new solar array can connect straight to the Powerwall without a separate string inverter.
FranklinWH aPower 2 is AC-coupled. It connects to your home's AC wiring and works alongside a separate solar inverter. It is controlled by FranklinWH's aGate, which manages backup switching. FranklinWH says one aGate can manage up to 15 aPower units, for up to 225 kWh.
FranklinWH aPower S, announced in October 2025, adds built-in power conversion that takes DC power straight from solar panels, much like Powerwall 3. FranklinWH's October 2026 aPower S datasheet lists up to 20 kW of solar input across 4 MPPTs, 15 kWh of capacity and lithium iron phosphate (LFP) chemistry, and FranklinWH says aPower S can be AC-coupled with aPower 2 units to add capacity.
Powerwall vs Franklin specs side by side
| Spec | Tesla Powerwall 3 | FranklinWH aPower 2 | FranklinWH aPower S |
|---|---|---|---|
| Energy per unit | 13.5 kWh (AC) | 15 kWh (AC, beginning of life) | 15 kWh |
| Continuous power | 11.5 kW | Up to 10 kW (8 kW nominal) | Up to 11.5 kW (with PV input) |
| Surge / motor start | 185 LRA | 185 LRA; 15 kW for 10 s | 185 LRA; 15 kW for 10 s |
| Solar input | Up to 20 kW, 6 MPPTs | None (AC-coupled) | Up to 20 kW, 4 MPPTs |
| Round-trip efficiency | 89% solar-battery-home | 90% | 90.5% solar-battery-load |
| Chemistry | Not listed on datasheet | Lithium iron phosphate (LFP) | LFP |
| Weight | 287 lb | 357 lb with cover | 388 lb with cover |
| Max units | Up to 4 Powerwall 3 | Up to 15 per aGate (225 kWh) | Up to 8 aPower S per aGate, 15 aPower units in total |
| Operating temperature | -4°F to 122°F | -4°F to 122°F; to 131°F at 5 kW derated | -4°F to 122°F; derated to 131°F |
Sources: Tesla Powerwall 3 North America datasheet (2024); FranklinWH aPower 2 and aPower S data sheets (October 2026).
Warranty: Powerwall vs Franklin
This is the biggest on-paper difference.
| Term | Tesla Powerwall 3 | FranklinWH aPower 2 / aPower S |
|---|---|---|
| Length | 10 years | 15 years |
| Capacity guarantee | 70% of 13.5 kWh at 10 years | At least 70% of 15 kWh at 15 years or 60 MWh |
| Throughput limit | Unlimited cycles for self-consumption, time-based control and backup; 37.8 MWh for other uses | 60 MWh aggregate throughput |
| Connectivity rule | May not honor full 10 years if offline for an extended period; at least 4 years guaranteed | Reduced to 4 years if offline more than 90 days and not restored after a reconnection request, or if not registered |
| Installer rule | Bought from Tesla or a Tesla certified installer | Authorized reseller and FranklinWH-certified installer |
FranklinWH's end-user warranty (effective October 28, 2026) also says coverage starts at installation or 12 months after manufacture, whichever is earlier, and that defects must be reported within two weeks of discovery. Tesla's warranty explicitly allows later owners with proof of ownership to make claims; FranklinWH's document references ownership transfers, but confirm transfer terms in writing if you might sell your home. Our guide to battery warranty terms explains throughput and capacity clauses in plain English.
Which works better with your existing solar?
- No solar yet. Powerwall 3 or aPower S can serve as both the solar inverter and the battery, which can simplify equipment.
- Existing solar with a working inverter. An AC-coupled battery like aPower 2 leaves your current inverter in place. Tesla also supports AC-coupled Powerwalls in Backup Gateway 2 setups, per its datasheet, so ask installers to quote both approaches.
- Large homes or high loads. FranklinWH's 15-unit limit per aGate gives more room to grow than Powerwall 3's four-unit limit, though few homes need that much.
If you are adding storage to panels you already own, read adding a battery to an existing solar system first.
Backup performance for real appliances
Both systems are designed for whole-home backup when sized correctly. On paper the two are now close: Tesla lists 185 locked rotor amps (LRA) of load-start capability per Powerwall 3, and FranklinWH's October 2026 datasheets list the same 185 LRA for aPower 2 and aPower S, plus 15 kW of peak power for 10 seconds. FranklinWH's product page also says aPower 2 can start a 5-ton air conditioner. Datasheet ratings are not a guarantee for your home, so ask your installer to check your largest motor loads, such as central A/C or a well pump, against each product. See can a home battery run central air conditioning for what to ask.
Size, weight and installation details
Both batteries are large, heavy units that need a solid mounting location.
- Powerwall 3: 43.25 x 24 x 7.6 inches, 287 lb. Rated to operate from -4°F to 122°F, with possible derating above 104°F. Listed to UL 9540, UL 9540A, UL 1973, UL 1741 and UL 3741, among others.
- aPower 2: 45.2 x 29.5 x 11.8 inches, 357 lb complete (the cover alone is 22 lb). FranklinWH lists IP67 protection for the battery pack and inverter, 30 dBA typical noise (45 dBA maximum) and, on its product page, automatic heating in extreme cold. Listed to UL 9540, UL 9540A, UL 1973 and UL 1741 SB, among others.
The aPower 2 is noticeably deeper and heavier, which can matter in a tight garage or on a narrow side yard. Local fire codes may also limit where batteries can go, so your installer should confirm placement with your permitting office. See the best place to install a home battery for typical options.
Questions to ask before you choose
- Is the installer certified by Tesla or FranklinWH? Both warranties require it.
- How many units do I need for my backup goals, and what continuous kW will that give me?
- Will my existing inverter stay, or will the battery replace it?
- Which circuits will be backed up, and will my largest motor loads start?
- Who handles warranty claims if the installer closes?
Cost and incentives
Installed prices depend on your installer, electrical panel and permitting, so compare written quotes that list usable kWh, continuous kW and every line item. As a rough benchmark, Berkeley Lab reported that adding storage raised the median cash price of a residential solar system by about $1.70 per watt in 2024.
The IRS instructions for Form 5695 state that residential clean energy credits cannot be claimed for expenditures made after December 31, 2025, and that costs count as paid when installation is complete. That means batteries installed in 2026 do not get the federal 25D credit. Some states and utilities still offer battery or virtual power plant programs.
Next steps
Ask each installer which product they are certified to install, since both warranties depend on certified installation. Compare installers on our solar company reviews, then use the solar panel calculator to make sure your array can recharge a 13.5 or 15 kWh battery on a typical day.
Frequently asked questions
Is FranklinWH bigger than Powerwall 3?
Yes, slightly. FranklinWH aPower 2 is rated 15 kWh per unit and Powerwall 3 is rated 13.5 kWh. Powerwall 3 has higher continuous power at 11.5 kW versus 10 kW for aPower 2.
Does the FranklinWH battery have a longer warranty than Tesla?
Yes. FranklinWH covers aPower 2 and aPower S for 15 years or 60 MWh at 70% capacity. Tesla covers Powerwall 3 for 10 years at 70% capacity, with unlimited cycles for normal home uses.
Can FranklinWH connect directly to solar panels?
The aPower S can. Its October 2026 datasheet lists up to 20 kW of solar input per unit across 4 MPPTs. The aPower 2 is AC-coupled and works alongside a separate solar inverter.
Do Tesla and FranklinWH batteries need internet to keep the warranty?
Both warranties depend on staying online and registered. FranklinWH reduces coverage to four years after more than 90 days offline if not restored, and Tesla says it may not honor the full ten years without connectivity but guarantees at least four.
Do batteries installed in 2026 qualify for a federal tax credit?
No. The IRS states that residential clean energy credits cannot be claimed for expenditures made after December 31, 2025. Check your state and utility for any remaining battery programs.
Sources
- Tesla Powerwall 3 datasheet, North America (2024)
- Tesla Powerwall Limited Warranty, USA (Rev 1.0, August 2023)
- FranklinWH aPower 2 product page
- FranklinWH - Meet aPower S (Oct 2025)
- FranklinWH Limited Warranty for End Users (effective October 28, 2026)
- Berkeley Lab - Distributed Solar and Storage 2025 Data Update
- IRS - Instructions for Form 5695
- FranklinWH aPower 2 data sheet (October 2026)
- FranklinWH aPower S data sheet (October 2026)
Questions and comments
Be the first to ask a question or share your experience.