Do You Need a Battery With Net Billing?
Net billing pays less for exported solar, which can make a battery more useful. Here is how to tell whether you need one.
You do not strictly need a battery with net billing, but a battery often makes solar more valuable under it. Net billing credits your exported solar at a lower rate than the price you pay for grid power, so storing midday solar and using it in the evening can be worth more than sending it to the grid. Whether a battery with net billing pays off depends on your utility's export rates, your time-of-use prices and the battery's cost.
Key takeaways
- Under net billing, exports are usually credited below retail price, so self-use is worth more than export.
- California's Net Billing Tariff values exports using the CPUC's Avoided Cost Calculator and requires time-of-use rates.
- The CPUC reports nearly 70% of Net Billing Tariff customers paired batteries with solar by the end of 2024.
- A battery costs thousands of dollars, so compare the extra savings against its price and warranty.
Net billing vs net metering: why it matters for batteries
Under classic net metering, each kilowatt-hour you export typically earns a credit close to what you pay for a kilowatt-hour you import. The grid acts like a free battery. Under net billing, exports are credited at a separate, usually lower rate. In California, for example, the CPUC says export credits are based on Avoided Cost Calculator values, which are "usually lower than import rates."
That gap is what makes a battery useful. If you export solar at a low credit at noon and buy power back at a high price at 7 p.m., you lose the difference. A battery lets you keep that midday energy and use it yourself later. Our guide to net metering vs net billing explains the two systems in more detail.
How a battery with net billing changes the math
Here is how solar-only and solar-plus-battery homes typically behave under a net billing tariff with time-of-use rates.
| Time of day | Solar only | Solar plus battery |
|---|---|---|
| Midday (strong sun) | Extra solar exported for low credits | Extra solar charges the battery first |
| Late afternoon and evening peak | Buys grid power at peak prices | Battery powers the home or exports at higher-value hours |
| Overnight | Buys grid power at off-peak prices | Buys grid power, or uses any remaining battery energy |
| Grid outage | System shuts off | Battery can supply backup power |
Export values under California's tariff change by hour, and the CPUC notes the export credit can even rise above the retail rate on late summer evenings. A battery that holds midday solar can discharge into those higher-value hours instead of exporting at noon.
California's Net Billing Tariff: a real example
California is the largest example of net billing. Key facts from the California Public Utilities Commission, checked November 2026:
- The CPUC adopted the tariff in decision D.22-12-056, issued December 15, 2022, for PG&E, Southern California Edison and San Diego Gas & Electric customers.
- Since April 15, 2023, customers applying for interconnection take service on the Net Billing Tariff, also called the Solar Billing Plan.
- Customers must use an electrification time-of-use rate: E-ELEC at PG&E, TOU-D-PRIME at SCE and EV-TOU-5 at SDG&E.
- Billing is monthly with an annual true-up.
- Existing customers on the older NEM 2.0 tariff can stay on it for 20 years from their interconnection date.
- The CPUC says nearly 70% of Net Billing Tariff customers paired batteries with solar by the end of 2024.
In its December 2022 announcement, the CPUC projected that average residential customers would save $100 a month with solar alone and at least $136 a month with solar plus storage, with both paying off their systems in about 9 years or less on average. Those are the regulator's projections, not guarantees for any one home.
To see how big the time-of-use gap can be, PG&E's E-ELEC pricing effective March 1, 2026 lists about 55 cents per kWh at summer peak (4 to 9 p.m.) versus about 33 cents off-peak. In winter the gap is much smaller, about 32 cents peak versus 28 cents off-peak. Our article on home batteries and time-of-use rates shows how to estimate what that gap is worth.
When a battery with net billing makes sense
A battery tends to add more value when:
- Your export credit is far below your retail price, especially your evening peak price.
- Your utility uses time-of-use electricity rates with a big peak-to-off-peak gap.
- You use a lot of power in the evening, such as cooking, AC or EV charging.
- Outages are common where you live and backup has real value to you.
- State or utility incentives lower the cost. EnergySage notes that California's Self-Generation Incentive Program (SGIP) can reach over $1,000 per kWh for customers who meet its eligibility requirements.
When you may not need a battery
Solar alone can still make sense under net billing if:
- You use most of your solar as it is produced, for example by running the pool pump, laundry or EV charging at midday.
- Your utility's export credit is close to the retail rate.
- Your rates are flat all day, so there is no peak price to avoid.
- You are on an older net metering plan that you can keep. The CPUC lets NEM 2.0 customers stay for 20 years.
Shifting your own usage into sunny hours is free and can capture some of the same value as a battery.
How to set up a battery for net billing
A battery only helps under net billing if it is set to charge and discharge at the right times. Most home batteries have operating modes for this. Tesla's warranty, for example, refers to solar self-consumption, time-based control and backup as standard uses with unlimited cycles. In general:
- Self-consumption stores extra solar during the day and uses it at night, reducing exports.
- Time-based control uses the battery during your utility's most expensive hours, and some systems can export at higher-value times.
- Backup reserve keeps a share of the battery full for outages, which reduces the amount available for bill savings.
Ask your installer which mode their savings estimate assumes and how much reserve they set aside for backup. A savings estimate built on full daily cycling is not realistic if you plan to keep the battery mostly full for storms.
Questions to ask before adding a battery
- What is my utility's current export credit, and how often does it change?
- Which time-of-use rate will I be on, and what are its peak hours?
- How much of my solar would I export without a battery, and how much with one?
- What incentives apply to a battery in my area right now?
Battery cost, lifespan and warranty
EnergySage marketplace data from the first half of 2026 put a typical 13.5 kWh home battery at about $15,647 before incentives. That cost needs to be recovered through bill savings, backup value or both, within the battery's useful life.
A note on tax credits: the federal residential clean energy credit (Section 25D) does not apply to expenditures made after December 31, 2025. For this credit, an expenditure counts as made when installation is complete, so a battery finished in 2026 generally does not qualify. State and utility programs may still exist, so check what applies where you live.
Warranties set expectations for that life. Tesla's US Powerwall warranty is 10 years with 70% capacity retained, and Enphase lists up to 15 years or 6,000 cycles for its IQ Battery 5P, according to their documents. For a full cost-benefit view, read are solar batteries worth it.
Next steps
Find your utility's current export rate and time-of-use schedule, then ask installers for a quote with and without a battery that shows the difference in projected savings. Run both through the solar quote checker and compare installers in our solar company reviews.
Frequently asked questions
Is a battery required under California's Net Billing Tariff?
No. The tariff does not require a battery, but the CPUC said the decision incentivizes customers to install storage, and it reports nearly 70% of Net Billing Tariff customers paired batteries with solar by the end of 2024.
What is the difference between net billing and net metering?
Net metering usually credits exports at or near the retail rate. Net billing credits exports at a separate, usually lower rate, which makes using your own solar more valuable.
Does a battery pay for itself under net billing?
Sometimes. It depends on the gap between export credits and peak prices, your evening usage, incentives and the battery's cost, so get quotes with and without a battery.
Can I stay on net metering if I add a battery?
Rules vary by utility. In California, NEM 2.0 customers can keep that tariff for 20 years from interconnection, but check with your utility before changing your system.
What rate plan do California net billing customers use?
The CPUC requires an electrification time-of-use rate: E-ELEC for PG&E, TOU-D-PRIME for SCE and EV-TOU-5 for SDG&E.
Sources
- California Public Utilities Commission – Net Energy Metering and Net Billing
- CPUC – CPUC modernizes solar tariff (Dec 15, 2022)
- PG&E – Electric Home Rate Plan (E-ELEC)
- PG&E – Residential electric rate plan pricing (effective March 1, 2026)
- EnergySage – Solar battery cost data (updated July 2026)
- Tesla – Powerwall Limited Warranty (USA)
- Enphase – IQ Battery 5P data sheet (US, 2023; hosted by Signature Solar)
- Congressional Research Service – Expiration and carryforward rules for the Residential Clean Energy Credit (Sept 2025)
Questions and comments
Be the first to ask a question or share your experience.