Incentives & Policy

Solar incentives and rebates in North Carolina: PowerPair, property tax and what is left in 2026

Solar incentives and rebates in North Carolina: PowerPair, property tax and what is left in 2026

North Carolina's main solar incentives are Duke Energy's PowerPair rebate and an 80% property tax exclusion. Here is who qualifies and what changed in 2026.

Solar incentives in North Carolina are limited and come mostly from utilities: Duke Energy's PowerPair pilot offers up to $9,000 toward a solar-plus-battery system, and state law excludes 80% of a solar electric system's appraised value from property tax. North Carolina has no solar sales tax exemption, according to EnergySage's 2026 state guide, and the federal 30% residential credit is not allowed for expenditures made after December 31, 2025.

Key takeaways

  • Duke Energy's PowerPair pilot pays up to $9,000 in one-time incentives to eligible North Carolina customers who install solar with a battery through a Duke Energy Trade Ally.
  • PowerPair funding is limited and tied to Duke's newer solar riders; installer reports say it has filled in Duke Energy Progress territory.
  • G.S. 105-275(45) excludes 80% of the appraised value of a solar energy electric system from property tax.
  • Net metering terms changed for Duke customers on October 1, 2023, and they matter more for payback than any rebate.
  • We did not find a current state income tax credit for home solar on the official pages we reviewed.

What solar incentives are available in North Carolina in 2026?

Compared with states that run large rebate programs, North Carolina offers a short list. Here is what we confirmed in November 2026.

IncentiveWhat it offersWho runs itStatus (Nov 2026)
Duke Energy PowerPairUp to $9,000 one-time for solar plus batteryDuke Energy Carolinas and Duke Energy ProgressPilot; limited, first come, first served
Property tax exclusion80% of a solar electric system's appraised value excludedCounty tax assessorIn law
Net metering (Duke riders)Bill credits for exports under Residential Solar Choice or Net Metering BridgeNC Utilities Commission; Duke EnergyOpen; Bridge closes to new participants Jan. 1, 2027
Net metering (Dominion Energy NC)Credits carried forward; unused credits forfeited each June 1Dominion Energy NCOpen
State sales tax exemptionNonen/aNot offered
Federal 25D creditNone for new systemsIRSNot allowed for expenditures made after Dec. 31, 2025

Duke Energy PowerPair: the main solar rebate in North Carolina

PowerPair is a pilot approved by the North Carolina Utilities Commission on January 11, 2024. Duke announced it in April 2024 and opened it with a random selection window that May. It pays a one-time incentive to customers who pair rooftop solar with a home battery.

How much it pays

Duke's trade ally page says customers can receive up to $9,000, depending on the equipment installed. EnergySage's North Carolina guide (updated January 2026) breaks that down as $0.36 per watt for solar, up to $3,600, and $400 per kWh of storage, up to $5,400, with limits on inverter and battery size. Ask your installer to confirm the current rates in writing before you sign.

Who qualifies

  • Eligible Duke Energy Carolinas or Duke Energy Progress customers in North Carolina.
  • Equipment installed by a Duke Energy Trade Ally.
  • Service on the Residential Solar Choice rider or the Net Metering Bridge rider.
  • Battery make and model on Duke's eligible list.
  • If your system is already running, you must apply within 90 days of its operational date.

Customers who join through the Net Metering Bridge rider must enroll the battery in Duke's Power Manager and EnergyWise Home battery control option, which pays monthly bill credits. That means Duke can call on your battery during peak demand events.

Is PowerPair still open?

Duke's page says incentives are limited and not guaranteed, and solar participation is capped at 30,000 kW-AC across both Duke utilities. A May 2026 fact sheet from Vote Solar reported 6,297 North Carolina households enrolled since launch. Duke's page did not state whether funds remained when we checked in November 2026. Palmetto's North Carolina utility guide (dated October 2026) says incentives are fully allocated in Duke Energy Progress territory, with limited funds left in Duke Energy Carolinas territory as of its last update. Ask a Trade Ally to confirm availability for your address.

Timing matters too. PowerPair requires service on the Residential Solar Choice or Net Metering Bridge rider, and under the tariffs Duke filed in 2023 the Bridge closes to new participants on January 1, 2027.

North Carolina solar property tax exclusion

Under G.S. 105-275(45), 80% of the appraised value of a solar energy electric system is excluded from property tax. In practice this means most of the value your panels add is not taxed. Talk with your county assessor about how the exclusion is applied to rooftop systems.

House Bill 1213, filed April 30, 2026, would limit the exclusion to systems placed in service before July 1, 2027. It is not law. Its last recorded action, on June 30, 2026, re-referred a committee version to the House Committee on Energy and Public Utilities, and it had not passed the House. Check with your county if you are planning a project close to that date.

Net metering as an incentive in North Carolina

For most homeowners, how your utility credits exported power affects payback more than any rebate. Duke Energy closed its legacy net metering rider to new customers on September 30, 2023. New Duke solar customers now choose between:

  • Residential Solar Choice (RSC): a time-of-use rate with critical peak pricing, a minimum monthly bill, a non-bypassable charge, and monthly credit for excess exports at an avoided-cost rate.
  • Net Metering Bridge (NMB): similar, but without the time-of-use requirement. It has limited capacity each year, closes to new participants on January 1, 2027 under the 2023 tariffs, and customers can stay on it for up to 15 years from their interconnection application date.

Dominion Energy North Carolina customers carry credits forward, but unused credits from the previous 12 months are forfeited each June 1. Our full guide to net metering in North Carolina walks through each rider.

Federal solar tax credit status in North Carolina

The IRS says the Residential Clean Energy Credit is not allowed for any expenditures made after December 31, 2025, and that an expenditure is treated as made when the original installation is completed. That applies to North Carolina homes too. Duke notes PowerPair incentives are in addition to any available tax credits, but for a system finished in 2026 there is no federal residential credit to combine with them.

If a quote still lists a 30% federal credit, ask for a corrected estimate. Our guide to solar savings without the federal tax credit explains how to check the numbers.

How to apply for North Carolina solar incentives

  1. Confirm your utility. PowerPair is only for Duke Energy customers in North Carolina. Dominion and co-op members should check their own utility's programs.
  2. Choose a Duke Energy Trade Ally if you want PowerPair, and ask whether incentive capacity is still available.
  3. Pick your net metering rider (RSC or NMB) with your installer, based on your usage and whether NMB is still open to you before its January 1, 2027 closing.
  4. Submit the interconnection application through your installer, along with the PowerPair application if eligible.
  5. Talk to your county assessor about the property tax exclusion after installation.

Is solar worth it in North Carolina without big incentives?

With few state incentives and no federal credit, your price per watt and your rider choice matter most. Check how your local electricity price compares with the US average of 18.16¢ per kWh on our North Carolina electricity rates page, and see typical sunlight figures on our North Carolina solar panel page. A battery may cost more upfront, but in Duke territory it can unlock the PowerPair incentive and help you use more of your own solar during peak periods.

Before you sign, ask each installer these questions:

  • Is the PowerPair incentive already subtracted from the price, and what happens if funds run out before my project is approved?
  • Which battery model is quoted, and is it on Duke's eligible list?
  • Which net metering rider does the savings estimate assume, and does it include the minimum bill?
  • Is sales tax included in the total?
  • Who files the interconnection and incentive paperwork, and how long does approval usually take?

If your installer goes out of business partway through, our solar orphans guide explains how to keep your project and warranty claims moving.

Next steps

Ask two or three installers for quotes that show the PowerPair incentive (if any), the rider assumed and savings without the federal credit. Then compare them with the SolarOwnersHub solar quote checker.

Frequently asked questions

Does North Carolina have a solar rebate?

The main one is Duke Energy's PowerPair pilot, which offers up to $9,000 toward solar paired with a battery for eligible Duke customers. Funding is limited, and installer reports in 2026 say it has filled in Duke Energy Progress territory.

Is there a state solar tax credit in North Carolina?

We did not find a current state income tax credit for home solar on the official pages we reviewed in November 2026. The federal residential credit is also not allowed for expenditures made after December 31, 2025.

Do solar panels raise property taxes in North Carolina?

State law excludes 80% of the appraised value of a solar energy electric system from property tax, so most of the added value is not taxed. Ask your county assessor how it is applied.

Do I need a battery to get the PowerPair incentive?

Yes. PowerPair is designed for solar paired with battery storage, installed by a Duke Energy Trade Ally, with an eligible battery model.

Is there sales tax on solar panels in North Carolina?

North Carolina does not have a solar sales tax exemption, according to EnergySage's 2026 state guide, so expect sales tax to apply.

Is North Carolina ending the solar property tax exclusion?

Not as of November 2026. House Bill 1213 would end it for systems placed in service on or after July 1, 2027, but its last action was a June 30, 2026 committee referral and it had not passed the House.

Sources

North Carolina at a glance

Related guides

Questions and comments

Be the first to ask a question or share your experience.

Comments are checked before they appear. No links or advertising. Guidelines.

Calculators for this topic

More incentives & policy guides

All incentives & policy guides →